Main Page / Product Lines / DEL-150 Drilling and Well Workover Monitoring System / Sensors / Pressure Sensor TP-140D(M)
Pressure Sensor TP-140D(M)
Category: Sensors, Sensors for Mud Monitoring System
Technical characteristics:
|
Measured pressure limit, kgf/cm2 |
250/400/600 |
|
Lowest pressure limit, kgf/cm2 |
0,1 |
|
Max acceptable basic percentage error, % |
1,5 |
|
Calibration interval, months |
36 |
|
Ambient temperature range,оС |
-45 ... +65 |
|
Marking of EX |
II 2G Ex ib IIA T3 Gb |
|
Rated supply voltage, V |
12...18 |
|
Min ingress protection, GOST 14254-2015(IEC 60529-2013) |
IР 65 |
|
Max weight, kg |
1,8 |
|
Max dimensions, mm |
Ø 90x140 |
TP-140D(M) is a diaphragm sensor to measure process pressure in neutral and aggressive media without a phase separator. The sensor is suitable to the quick connect.
Capabilities:
- Ex-rated;
- Suitable for aggressive, viscous, heterogeneous media
Design features:
- No phase separator is required;
- The size of quick connect BRS-2", FIG1502 enables fast mounting to the existing flush fluid system.
