Main Page / Product Lines / DEL-150 Drilling and Well Workover Monitoring System / Sensors / Pressure Sensor TP-140D
Pressure Sensor TP-140D
Category: Sensors
Technical characteristics:
|
Measured pressure limit, kgf/cm2 |
250/400/600/1000 |
|
Lowest pressure limit, kgf/cm2 |
0,1 |
|
Max acceptable basic percentage error, % |
1,5 |
|
Calibration interval, months |
36 |
|
Ambient temperature range,оС |
-45 ... +65 |
|
Marking of EX |
II 2G Ex ib IIA T3 Gb |
|
Rated supply voltage, V |
12...18 |
|
Min ingress protection, GOST 14254-2015(IEC 60529-2013) |
IР 65 |
|
Max weight, kg |
0,46 |
|
Max dimensions, mm |
Ø 45x102 |
TP -140D is the part of DEL-150 used to monitor process pressure in the pipeline or cylinder drilling and workover rigs.
Measuring Parameters:
Capabilities:
- Ex-rated.
Design features:
- A tee is included to mount the sensor with standard gauges;
- Phase separator required;
- To monitor tong torque pressure on the hydraulic tongs TP-140D (VBI) sensor is included;
- TP-140D (VBI), inductive sensor and switched spur are in the package.
